Fonsec@
In Memoriam
- Entrou
- Set 22, 2006
- Mensagens
- 29,306
- Gostos Recebidos
- 6
Sim2-DM800SE-Newnigma2 LEAN v4.0.8 SIM2 #84d Jasper (2014-01-27)
Clean, no changes.
Sim2
SSL84d
Enigma2: 2013-11-18-tarball (thx gjstroom)
################################################## #######################################
Webinterface is working.
Teletext is working.
################################################## #######################################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
################################################## #######################################
No WLAN driver included (this is a feature of Newnigma Lean image):
The following drivers are available on the online feed:
Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:
opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c
reboot
################################################## #########################################
Download:
2013-01-27
Download
Jasper
################################################## ###################
Newnigma2 team proudly presents:
Newnigma2 v4.0.8
################################################## ###################
Basics:
Clean, no changes.
Sim2
SSL84d
Enigma2: 2013-11-18-tarball (thx gjstroom)
################################################## #######################################
Webinterface is working.
Teletext is working.
################################################## #######################################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
################################################## #######################################
No WLAN driver included (this is a feature of Newnigma Lean image):
The following drivers are available on the online feed:
Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:
opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c
reboot
################################################## #########################################
Download:
2013-01-27
Download
Jasper
################################################## ###################
Newnigma2 team proudly presents:
Newnigma2 v4.0.8
################################################## ###################
Basics:
[*=center]Enigma2 4.0: 18.11.2013
[*=center]Enigma2 Plugins: 27.01.2014
[*=center]Newnigma2 Plugins: 27.01.2014
[*=center]driver: 28.12.2013
[*=center]secondstage: 84
[*=center]kernel 3.2.54
[*=center]driver: 28.12.2013
[*=center]secondstage: 88
[*=center]kernel 3.2.54
changelog E2 18.11.2013:
[*=center]fixed greenscreen on cancel press during service/marker/bouquet rename
[*=center]fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
[*=center]fixed possible crash on screen close
[*=center]fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
[*=center]fixed possible ConfigLocations crash (typo)
changelog E2 12.11.2013:
[*=center]added unicable support for jultec JPS0501-8
[*=center]added possibility to rename services/markers and bouquets via channelselection context menu
[*=center]small storage manager fixes
[*=center]changes to support picons for remote services (partnerbox)
[*=center]fixed possible epgcache crash
[*=center]fixed now event epg query when no next event is available
[*=center]fixed endless loop caused by wrongly encoded service names on 10E 11221V 27500
changelog E2 01.10.2013:
[*=center]extend pid cache for audio types other than AC3 and MPEG
(required to store last selected ac3+ or aac audio tracks)
[*=center]dont send CEC poweroff on idle to standby transition again
[*=center]dont send CEC poweron on idle to standby transition
[*=center]dont restart previous service on idle to standby transition
[*=center]fixed rare crashes on e2 shutdown
[*=center]call flush and fsync when storing parental control white/blacklist
Notice: Update from v4.0.x to 4.0.8 possible.
Changes:
[*=center]Added: Skin Evolution-HD by Kerni (thx)
[*=center]Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
[*=center]Added: Kerni.Gnome-HD by Kerni (thx)
[*=center]Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
[*=center]Added: mediaportal
[*=center]Added: swapmanager
[*=center]Added: wget
[*=center]Added: stat
[*=center]Added: weathercomponent (needed for some skins)
[*=center]Added: eventposition (needed for some skins)
[*=center]Added: reftopiconname (needed for some skins)
[*=center]Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
[*=center]Added: Black-Box.HD.ME (32bit skin)
[*=center]Added: cryptsetup more information
[*=center]Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
[*=center]Added: free space check's before installing or upgrade packages
[*=center]Added: min free flash space is 3mb for installing/upgrading some packages
[*=center]Added: improve network connectivity check in newnigma2 installer
[*=center]Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
[*=center]Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
[*=center]Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
[*=center]Bugfix: neutrino keymap
[*=center]Bugfix: newnigma2.Kerni.PanTV-HD icons
[*=center]Bugfix: Caid Renderer didn't close ecm.info and share.info properly
[*=center]Bugfix: for loading wrong or no newnigma2 service menu png's
[*=center]Bugfix: loosing picon value in servicelist after using configsaver
[*=center]Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
[*=center]Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
[*=center]Update: Some improvements on our onlineinstaller
[*=center]Update: znc to version 1.2
[*=center]Update: openvpn to version 2.3.2
[*=center]Update: german translation
[*=center]Update: mediaportal to version 5.0.X
[*=center]Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
[*=center]Update: picon renderer. create piconSList dir for servicelist picons.
[*=center]Removed: we have removed non working plugins. most of them are integrated in mediaportal.
[*=center]Removed: keymanger plugin from image. It's still available from our feed.
[*=center]release changes from 4.0.0 to 4.0.7
[*=center]here u can find USB to UART driver
[*=center]here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.8:
if you have troubles by upgrading to v4.0.8 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".