- Entrou
- Set 25, 2006
- Mensagens
- 1,052
- Gostos Recebidos
- 0
Boas,
Aqui fica como usar este programa, de forma simples.
I. Receiving Data from Receiver to PC
1. connect PC and Receiver with RS232c cable
2. Turn off power and keep the receiver in standby
3. Press Blue Arrow button on Ariter program
4. Then, press “74621” on Remote Control to the receiver
5, It starts receiving data from the receiver to PC
6. After completing receiving the data, it is opened
II. Sending Data from PC to Receiver
1. Connect PC and Receiver with RS232c cable
2. Turn off power and keep the receiver in stand-by mode
3. Press Red Arrow button on Ariter program when it opens Data file
4. Then, press "24680" on Remote Control to the receiver
5. It starts sending Data to the receiver
:espi28:
Aqui fica como usar este programa, de forma simples.
I. Receiving Data from Receiver to PC
1. connect PC and Receiver with RS232c cable
2. Turn off power and keep the receiver in standby
3. Press Blue Arrow button on Ariter program
4. Then, press “74621” on Remote Control to the receiver
5, It starts receiving data from the receiver to PC
6. After completing receiving the data, it is opened
II. Sending Data from PC to Receiver
1. Connect PC and Receiver with RS232c cable
2. Turn off power and keep the receiver in stand-by mode
3. Press Red Arrow button on Ariter program when it opens Data file
4. Then, press "24680" on Remote Control to the receiver
5. It starts sending Data to the receiver
:espi28: