Drivers Dreambox 800HD se - OE 1.6

[jairobel]

Drivers Dreambox 800HD se - OE 1.6

these drivers are not working with the previous kernel!
they need the kernel 2.6.18-7.4 and the v4l-dvb modules!
 
moreover, these drivers need a current enigma2 version... compiled against the v4l-dvb includes (because of the new dvb-s2 tuning api)
 
dm800/dm8000:
- add support for bcm4505 based tuner (dm800se tuner)
 
dm800/dm8000/dm500hd
- fixed non blocking write to /dev/dvb/adapter0/video0 audio0
- new api for internally connectable tuners (needs enigma2 changes)
- new api to read lnb current
- fixes for greek HD services
- many internal cleanups and speedups
- fixed occasional demux bug which froze the complete stb
- the demux now supports more section filters
- migrate satellite tuners to official linux tv DVB-S2 tuning api
 
dm8000:
- add support for all layers of the addon remote control
 
dm800se:
- initial driver release

 

[Fergomes]

Drivers for DM 800 se in tar.bz2 format


dm800/dm8000/dm800se/dm500hd:

- tune to symbol rates < 1000ksyms now works like old linuxtv api again

- fixed dvb-s2 linuxtv api capabilities

- vtuner fixes/speedups, add vtuner acceleration support

- fixed picture dropouts seen on some h264/mpeg services (buffer underruns)

- fixed rare PAT timeout problems after deepstandby wakeup

only dm800se:

- fixed deepstandby wakeup with the (additionally purchasable) omikron plus remote control

all:

- fixed bcm4505/06 signal problems after few seconds on Astra 19.2 tp 11914H 27500 9/10

 

[aguda]

04-05-2011

New update dm800 hardware drivers


- bcm4506: reintroduce minimum tune timeout of 1,5sek to fix tune failed problems caused by slow SEC switches

 

[aguda]

Drivers for DM 8000 04/05/2011 in tar.bz2 format

bcm4506: reintroduce minimum tune timeout of 1,5sek to fix tune failed problems caused by slow SEC switches

 

[Fergomes]

Drivers for DM 800 se in tar.bz2 format
Update 06/05/2011

 

[Fonsec@]

Lastest Drivers for DM 800SE

Lastest Drivers for DM 800SE...

10-11-2011


dreambox-dvb-modules.bb: update dreambox hardware drivers


dm800/dm8000:


- fixed sometimes inoperable hdmi audio after code change to AAC/MP3


dm7020hd:


- fixed bcm4505 tuner detection problems on boot from deep standby


- fixed support for high bitrate transponders (no CI support yet)


all:


- dont allow to allocate a demux pid filter for fake pid 0x2000


- fixed inoperable AUDIO button on DM7020HD remote control (dip switch depending)


- optimized blindscan (ignore duplicate found TPs, low SR crash)


dreambox-dvb-modules_2.6.18-7.4-dm800se-20111109-r0_dm800se.rar (1.98 MB)
dreambox-dvb-modules-dbg_2.6.18-7.4-dm800se-20111109-r0_dm800se.rar (862 Bytes)
dreambox-dvb-modules-dev_2.6.18-7.4-dm800se-20111109-r0_dm800se.rar (830 Bytes)​

 

[Fonsec@]

03-02-2011

update dreambox hardware drivers

- cxd1981(hybrid DVB-C/-T) increased max. frequency to 900Mhz

- cxd1981(hybrid DVB-T) fixed ineffective 5V for active antennas after mode change

- bcm4505/6 improved receiption sensitivity (fixes problems with small dishes since blindscan support)

dm500hd,dm800se,dm7020hd: fixed audio volume boost on alsa playback

dm7020hd:

- fixed frequently "error code 0x18006" messages on bootup

 

[aguda]

Experimental Modules vom 09.02.2012

 

[Fonsec@]

Latest updated DMM hardware drivers 16.02.2012

update dm500hd, dm800se, dm8000, dm7020hd and dm800 hardware drivers

- fixed overflow on aspect ratio calculation
this fixes possible wrong scaled content

- fixed scale factor calculation for dm800
i.e. fixes wrong scaled IPTV services

- fixed non transparent framebuffer after bootup
this fixes not visible bootlogo before e2 starts on dm800

 

[Fonsec@]

Update:22.03.2012

Update:22.03.2012

update dreambox hardware modules for dm500hd, dm800se, dm7020hd, dm8000

reverted: "fixed strange aliasing noise on PCM Playback with needed upsampling" change from 20120210 drivers

 

[Fonsec@]

Update: OE2 Driver

update dreambox hardware drivers:

- fixed DVB-T with tda1004x based NIM

- fixed HDMI/DVI mode detection bug



dm7020hd:

- added support for WMA (without DRM only)

- added support for WMV3 and VC1 (without DRM only)

 

[rlmariz]

This drivers works Pen PlayTv PixelView?

thank's
Ricardo

 

[Fonsec@]

Update Driver 3.2.3


Quote:
dreambox-dvb-modules: update OE1.6 dreambox hw drivers

- fixed not working "dm7020hd" remote control with dm800se and dm500hd after fp update

- fixed demux bug

- small CI fix

 

[Fonsec@]

dreambox-dvb-modules: update dm800se drivers to 20121207


- enabled wma and wmv support
- fixed a small vtuner bug

 

[Fonsec@]

New Driver 25.03.2013


update dreambox hardware drivers:

- fixed a demux problem which can cause 0 byte ts files when multiple parallel high bitrate recordings are running (from same transponder/demux)

dm500hd, dm800se, dm800
----------------------- -
fixed a small vtuner bug (in /proc/bus/nim_sockets)

dm800se, dm500hd, dm8000, dm7020hd
---------------------------------- -
fixed a small MPEG4 ASP playback bug (xvid, divx, ...)

dm800
----- -
fixed a vtuner bug which can cause deadlocks

 

[Fonsec@]

Latest Driver DM800se (03.05.2013)

 

[Fonsec@]

08.06.2013

update dreambox hardware drivers
--------------------------------

- fixed AAC problems (dm800se, dm500hd, dm7020hd)
- added support for more samplerates to alsa driver (not dm800)
- fixed boot progressbar position (dm7020hd)
- small stability improvements

 

[Fonsec@]

OE2.0 Driver Update

30.12.2013


- dreambox-dvb-modules: update dm800, dm500hd, dm800se, dm7020hd, dm800sev2, dm500hdv2 hw drivers
- fixed retune on signal lost for cxd1981 tuner (DVB-C/-T hybrid)
- fixed possible crash on last demux filter stop
- fixed possible demux buffer overflows on high bitrates


Download